Can You Use Swiffer On Porcelain Tile? Detailed Guide

Can You Use Swiffer On Porcelain Tile? Although porcelain is extremely durable, there are several products and methods to avoid: never use a product that contains ammonia or bleach (or any type of acid-based cleaner);  they may change the color of the tile and / or color the mortar.  Never use oil-based detergents or wax cleaners.

Can You Use Swiffer On Porcelain Tile?

Yes, you can use Swiffer on tiled surfaces.  We humans have an incredible desire to constantly improve the situation, and this can lead to truly ingenious solutions to the problems we all face.  One of them is Swiffer.  This can significantly reduce cleaning time, as well as significantly reduce the effort required for cleaning.  However, as with any such good, there may be some unknowns, and one of them is the suitability of Swiffer for tiled floors.  If you asked “can you use Swiffer on a tiled floor?”  Don’t worry, we have the answer for you.

Types Of Floors You Can’t Use Swiffer

It can be used on most tiled floors, but there are exceptions. A lot of effort has been put into making Swiffer so good.  It also means that it must work on a wide range of floor types.  It works really well on most types of tiled surfaces, but there are some exceptions.  Here are some tile surfaces that may not be sufficiently cleaned with Swiffer.

Non-sealed or unfinished tiles

These tiles are quite delicate and can be easily damaged or etched.  Swiffer can end up removing more than just dirt and grime and leaving an irreparable mark on the tile.  To clean such a tile should use something very delicate. Be sure to check out the Best Swiffer For Bathroom

Marble tiles

Marble can look incredible and feel, as well as enhance the aesthetics to a high level.  The downside is that it can be easily damaged.  This can lead to an expensive repair bill.  Swiffer is not suitable for use on marble tiles, as it can cause a chemical reaction and corrode the surface.  It can also happen very quickly, and it may be too late when you realize what is happening.  There are cleaners specifically made for marble tiles.  Use them instead of Swiffer.

Rough tiles

There are certain tiles that are designed for use in places that can be very stiff for conventional tiles.  These include outdoor areas, patios and walkways.  Tiles designed for such places can be very rough, and we do not recommend using Swiffer on them, as this can damage the Swiffer itself.  You can use a variety of tools to clean such tiles, and finding an alternative to Swiffer should be fairly easy.

Laminate

The good news is that Swiffer will not damage the laminate floor.  The reason we included laminate flooring here is that Swiffer is not as effective on this tile as most others, and you should use something specifically designed for laminate flooring.

Tiles laid out in intricate patterns with narrow corners

The shape of the Swiffer is such that getting into a tight corner is not the easiest.  It does not matter what type of tile is used.  If the Swiffer can’t reach the corners, they’ll stay dirty no matter how carefully you approach the rest of your cleaning mode.  This can give the impression of a job poorly done.  To avoid this, use something old to clean narrow corners or deep seams.

How To Clean Porcelain Tile Floors

  • Remove loose dirt, sand and other debris with a vacuum cleaner or broom.
  • Use an old credit card or plastic spatula to scrape off any sticky residue on the tile.
  • Fill the bucket with hot water, half a glass of vinegar and half a tablespoon of soap. Do not use too much soap, otherwise the remnants of soap will make your floor dull.
  • Before wiping, rinse the mop head under hot running water to remove debris from the last use.
  • Wipe the tile floor with soapy water.
  • Then remove any soap residue by rinsing them with plain hot water.
  • You can let the floor dry in the air, but drying with a clean cloth or towel will remove even more dirt and prevent water stains.

How To Clean Grout From Porcelain Tiles

Your ceramic tile floor will look just as good as the grout that holds it in place.  Homeowners can rent solution cleaning machines at hardware stores that use hot steam to deeply clean the solution.  However, if you want to use the method with your own hands, the best way to clean the grout is described in detail below:

  • Mix a bucket of water with powdered oxygen bleach according to the instructions on the bottle. This effective type of bleach has a different chemical compound from chlorine bleach, non-toxic and safe for color.  Usually you can find it in cleaning at any grocery or hardware store.
  • Apply the solution to the grout line with a spray or brush. For grout, which is very dirty, we prefer to use both methods of application.
  • Allow the solution to stand in the solution for at least 30 minutes. The longer you wait, the better.  Oxygen ions in the bleach solution continue to work for up to six hours.
  • When the bleach solution is absorbed, use a stiff nylon brush or an old toothbrush to wipe the grout lines. Wipe a small area of ​​the solution at a time and wet the dirty water with a towel on the go.
  • When all grout lines are clean, rinse the area with fresh water and wipe with a clean cloth.
  • When you are done and the floor is dry, use a sealant to keep the grout clean.

You can replace oxygen bleach with a mixture of white vinegar and lemon juice or baking soda, which you probably already have on hand.  But based on our experience, the bleach solution requires the least amount of cleaning and is the most effective for removing stains.

How To Clean Porcelain Without Residue

  • Collect dirt and debris with a dust mop.
  • Use a pH-neutral cleaner or mix your own in a spray bottle with water and phosphate-free soap.
  • Spray the floor, but do not wet the marble too much.
  • Use a sponge to spread the cleaner.
  • Gently wipe dry with a soft cloth.

How To Clean Unpolished Porcelain Tiles

For unpolished tiles, broom and vacuum every time you feel dirt.  For matte tiles, you can use a mixture of vinegar and water for cleaning or industrial means for cleaning porcelain for the shower.  Spray this solution and wait 5 to 10 minutes for it to release dirt.  Then use a soft bristle brush to clean the debris.

Then wash the area with warm water and wet it dry with a microfiber cloth.  Unpolished porcelain tiles usually do not interfere, so this tile requires less effort.  Whatever method you use for cleaning, make sure they are all soft on the surface.  Here’s how to clean matte porcelain.

How To Clean Polished Porcelain Tiles

Since you are going to clean the tile after a long time, there will be the right amount of dirt.  So, first of all, start with cleaning with a brush and vacuum cleaner to facilitate the second step.  For dry growth, spray the tile with hot water to loosen it.

If there is heavy soiling, use a brush with a soft nylon bristle.  If you don’t already have one, you can use an old toothbrush, but it can damage your hand.  Then wipe off the cleaning residue with warm water.  Porcelain tiles are in most cases resistant to stains, but if the tiles are painted, repeat the process with a mixture of vinegar and water.  Once the tile is completely dry, polish the tile with clean gauze for a fantastic shine.

What Not To Use On Porcelain Tiles

  • Never use ammonia, bleaches or acid-based products to treat porcelain. This will change the color and appearance to an extreme level.
  • Avoid oil-based cleaners such as wax cleaners. These types of cleaners mix with the dirt in the tile and are very difficult to remove.
  • Do not use dyes or dyes to clean unglazed products.
  • Never allow the tile to touch the steel wool. It can stick to the sides and leave rusty stains on the tile.
  • Rigid bristles or cleaning brushes are the worst for porcelain. Therefore, never use them on the tile to keep the shine.

CONCLUSSION

Porcelain is strong and dense, so it was quite a popular choice for bathroom renovation projects.  However, even if you get a good level of water resistance and stain control with these tiles, they will require you a decent amount of time to clean and maintain.  But this cannot be a reason for you not to do a deep and good cleaning of the shower tile.  So, let’s find out what is the best way to clean porcelain.

Can You Use Swiffer On Porcelain Tile FAQs

Does vinegar damage porcelain tile?

Although some people recommend using white vinegar and an aqueous solution to clean ceramics and tiles, experts advise against doing so, as vinegar is very acidic and can damage grout and glaze on tiles.

How do you make porcelain tile shine?

Take a bucket of water and pour a teaspoon of mild detergent into it.  Take a soft bristle brush or toothbrush and immerse it in soapy water.  Rub the tile in a circular motion.  Step 2. Rub the floor until the residue disappears from the tile, now moisten the cloth and wipe the remnants of the solution from the tile.

What Is The Best Way To Clean Porcelain Tile?

Moisten the tile with a solution of vinegar and water; leave it for five to ten minutes.  Rub the floor with a soft bristle brush, working in two directions again.  Rinse the floor with hot water to thoroughly remove the cleaning solution.  Walk on a clean porcelain floor with a damp mop.

error: Content is protected !!