Can You Wash Roomba Filter? Detailed Guide

Can you wash Roomba filter?  The filter is separate from the dustbin. And of course, it has its own function and need for maintenance.  More than the dustbin, the filter is more likely to have dirt and dust stuck on it.  And when this dirt and dust accumulates, it can prevent your Roomba from working properly.  So that it no longer collects garbage from the floor of your house.  The good news is that the Roomba filter is easy to clean.

Can You Wash Roomba Filter?

Roomba also contains a filter that is designed to trap particles and prevent them from recirculating throughout the room being cleaned.  Although filter replacement is an important part of maintaining any vacuum, filters can often be washed, dried, and reused between replacements in many conventional vacuum cleaners.

Why You Need To Ensure That Your Roomba  Filters Are Clean

Why you need to make sure your filters are clean before the next cleaning cycle is because they can clog.  If the filters become clogged, your device may overheat and its performance may be significantly reduced.  Although different Roomba models have different prices, they are quite expensive.  That’s why you must first know how to clean Roomba components before doing so.

How Often Should I Change My Roomba Filter?

Although there are several factors that determine how often, iRobot suggests changing the filters on these vacuum cleaners at least once every two months.  However, according to Clean Home World, filters can usually be sufficient for 6 to 12 months before replacement is required if proper filter cleaning is performed weekly.

Again, there are various factors that affect how often a filter needs to be replaced.  For example, if you live in a family of two, your floor is more likely to be less contaminated than if you live in a family of five with pets.  While in the first example, it may be useful to replace the filters every 6-12 months.

What Is The Best Roomba Filter Replacement?

HEPA Roomba Filter Replacements for iRobot Roomba E I & J Series Vacuum Cleaner i7 i7 Plus j7 E5 E7. This roomba replacement parts includes 12 pack roomba filters and 1 cleaning brush. These roomba filter replacements engineered to work on iRobot roomba E & I Series(i6, i7, i7 plus, e5 etc) vacuum cleaner, which offers an in-depth cleaning to your high stacked carpets to remove anything but fresh air. Also see the 5 Best Roomba with Mapping 

Cleaning Your Roomba Filters

To keep your Roomba looking perfect, you need to clean it regularly, preferably after each cleaning cycle.  First you need to unplug the bin and empty it.  Before returning the trash, remove the filters and touch the trash can to remove debris.  You can also get rid of debris with compressed air.

If you decide to clean the filters with water, make sure they are completely dry before installing them back.  Otherwise, if you put them back before they are completely dry, it may damage your device.

How To Wash Roomba Filters

The simplest level of maintenance should be performed after each cleaning cycle to clean the dirt that accumulates the most. Start by emptying the bin.  But before putting it back, remove the two filters located inside.  They are needed to catch dust, and should be replaced monthly or so, depending on how often you vacuum.

But if you’re ready to wear your younger MacGyver hat, you can postpone replacing those filters. The easiest way to clean these filters is to simply tap them on the side of the trash can to knock out any debris.  However, if you have a few extra minutes, you can use compressed air to blow out any debris.

For even deeper cleaning, rinse the filters with water.  But you have been warned: do not put the filters back in the Roomba until they are completely dry.  Putting them back before they are completely dry can permanently damage your work.  (And then you return to the awful standing vacuum.) See the Best Roomba with Mop combination for your tile floors

Cleaning the brushes and bearings

Your filters are not the only components that need regular cleaning.  Your brushes and bearings also need to be cleaned at least once a week if you use Roomba daily.  So all you have to do is remove the combs and remove the hair or hair.  You can do this with a comb or any other tool that can do the job.  Also, be sure to clean the bearings of any debris or dirt.

Cleaning the sensors and front wheel

Your Roomba vacuum cleaner has sensors that allow it to orient itself during the cleaning cycle.  And sometimes they can collect dirt.  So don’t forget to clean them regularly if you want your vacuum cleaner to work effectively.  You can use a piece of cloth to remove any dirt or dust.

The same goes for the front wheels.  They are easily detachable, so you will not have problems with removal and reinstallation.  Remove any dirt or debris before putting them back.  Be very careful when cleaning the front wheels so as not to damage the sensors located on the rear of the wheels.

 Can You Wash My Roomba Bin?

You can wash the Roomba bin.  The Roomba container is for manual rinsing only.  It is not dishwasher safe, so it should only be cleaned with warm water.  After washing, allow the container to dry completely before installing it in place, otherwise mold and fungus may form inside the robot.

Emptying the container and rinsing regularly with water should allow the Roomba to hold more dirt.  It is recommended to empty the bucket after each use, and you can wash the container once a week.

How to Clean Roomba Bin and Clean Filter

The Roomba 600 series includes the Roomba 650, 675, 690 and 695.  The following are the steps to clean the container, clean the filter, and reinstall it.

  • Press the unlock button at the top of the Roomba and pull out the container.
  • Press the yellow lever and open the container.
  • Empty the contents of the container (do not wash the container in water, just wipe it, possibly with a dry cloth).
  • Press the yellow tabs on both sides of the filter to pull it out.
  • Tap it in the trash, clean. (If it is too dirty, rinse the filter with water and make sure it is dry before returning it)
  • Place the cleaned or replaced filter back in the container.
  • In the last step, insert the basket back into the Roomba.

How To Maintain Of Your Roomba

Roomba works smart and is very easy to use.  And it is even easier to take care of him.  Just a few quick, simple steps will help your robot work at its maximum, such as emptying the container after each use and cleaning the filter once a week.  This gives your Roomba a good, clean start to every job.

The full shopping cart indicator and notifications for iRobot Home are useful reminders.  If you share pets at home, you should clean the filter twice a week to shake off wool, dirt, dust and wool.  Pet-free homes should clean Roomba filters once a week.

To make sure that each Roomba component can move freely, check the extractors, side brush and front wheel regularly, and remove hair or debris.  Roomba will let you know if something goes wrong and give troubleshooting tips to help you get back to work.

Can You Wash Roomba Filter FAQs

Can I Wash Roomba Filters?

Yes, Roomba filters can be washed, but must be dried before returning to Roomba.  But instead of washing, you can use pressure for deep cleaning.  Here’s the ultimate guide to cleaning and replacing Roomba filters.

Where Can I Buy Roomba Filters For Replacement?

To ensure excellent performance and product quality, buy directly from iRobot online stores.  If not available, you can purchase a replacement from a third-party vendor.  But be sure to check the product and the legitimacy of the manufacturer.  You can also ask other users to recommend Roomba to help them avoid erroneous products.  Also, don’t forget to buy replacements that are compatible with your Roomba series.  If you need to, see the Roomba user guide.  Better yet, consult your iRobot support staff.


Can You Wash Roomba Filter? Roomba filters are not intended for washing or contact with any liquids.  To clean it, simply shake or tap the filter to remove accumulated dirt and dust.  If dirt gets stuck on it, use tweezers or other similar items to remove it. Roomba uses high-performance particulate filters (HEPA) to filter out 99% of dirt, dust, allergens, mold, pollen and more.  In fact, research has shown that it is most effective at capturing smaller particles.

This is great news for people who are allergic or have pets. Clean the filter every time you empty the Roomba.  This will prevent your Roomba filter from accumulating excess dirt and dust for an extended period of time.  Simplify cleaning the Roomba filter.