Is your Roomba vacuum showing Roomba Error 6 not working? If yes you are not alone in this. Roomba robot vacuums are one of the most innovative technologies that have simplified our regular cleaning routines. These helpful robots clean the home as if they were a cleaning fairy. However, these Roomba robots, like all other technology, have inherent flaws. For example, your Roomba might stop working, making you feel that it isn’t useful anymore, but these issues can be fixed by troubleshooting them. So, why is your Roomba Error 6 Not Working?
When your Roomba becomes trapped on a cliff, threshold, or dark surface, Error 6 appears. Insufficient illumination, uneven flooring, or dark-colored carpets cause a Roomba to turn away. Then it announces “Error 6” to let people know there’s a problem. Roomba Error 6 may be triggered by filthy cliff sensors in this way.
Because there aren’t any fatal problems. They’re just routine maintenance that your Roomba will need from time to time. And numerous sorts of sounds will alert you to your Roomba’s status.
How To Fix: Roomba Error 6 Not Working
1. Cliff Sensors
Roomba vacuum cleaners are “intelligent” machines. They are so intelligent that they can recognize “hazardous” locations. They are aware of any surrounding cliffs, thresholds, or staircases.
The iRobot Roomba series 900 and other models all feature several devices called cliff sensors, which are located along the outer edge of the underside of the vacuum. On the outside of a Roomba 960, there are 6 pairs of optical sensors around the underside of the vacuum. They serve as “depth sensors” and prevent your robot vacuum from dropping down stairs or steep drop-offs, among other navigation functions.
If you’re getting a message from your Roomba that says “error 6, it’s probably because of high thresholds, patterned carpets, dark-colored rugs, the edge of the stairs and poorly-lighted rooms or areas. In specific ways, a Roomba recognizes these places as obstacles.
Do you know what a Roomba does when it comes to an obstacle? It stays away from them. Leaving certain portions of your house filthy and undisturbed. So how do you fix “Roomba Error 6 Not Working”
When a Roomba comes across cliffs or dark surfaces, it usually reroutes. It immediately withdraws and moves on to clean other places. A Roomba, on the other hand, may fail to identify a cliff in advance. As a result, it becomes trapped in it. You have to pick up your Roomba if this occurs. And then relocate it to another position.
2. Press The “CLEAN” button Once
If your Roomba still displays “Roomba Error 6 Not Working” after you’ve relocated it. The problem will not be resolved by just relocating your Roomba. After you’ve moved it, use the “CLEAN” button to fix it.
Only use the “CLEAN” button once. If you hold or push it too many times, it may cause another problem. The cleaning procedure is restarted by pressing the “CLEAN” button. Allowing your vacuum to pick up where it left off cleaning.
The “CLEAN” button resets the cleaning process. It’s not even a Roomba. As a result, you won’t have to bother manually programming your Roomba to clean your home. And, certainly, the cleaning mode will be maintained as planned.
“How can I ensure my Roomba doesn’t clean the same room twice?” Remove it from the cleaned areas if you have an older model, such as the iRobot Roomba 694. This is due to the lack of a mapping mechanism in older models. They also can’t tell the difference between cleaned and filthy places.
However, you may leave your vacuum wherever you are if you have a newer model, such as the iRobot Roomba s9+, because the most recent Roomba machines include Imprint Smart Maps. A mapping technique that directs robot vacuum cleaners to clean in a systematic manner.
It will automatically return to its old spot if you leave it anywhere. And keep cleaning systematically. Imprint Smart Maps also give information. It is easy to plan a cleaning service that meets your needs and fits into your lifestyle.
3. Sufficient Illumination
Isn’t it true that Roombas know how to avoid cliffs? Yes, they can. But, sometimes they tumble down cliffs (or, even worse, staircases!) if a place is dark. Making your Roomba more susceptible to harm.
Underneath your Roomba, there are two cliff sensors. As the name says, these sensors detect cliffs and dark surfaces to prevent fall-offs. Roomba’s cliff sensors use infrared technology to identify things. Infrared, on the other hand, requires line-of-sight to work correctly.
That is to say; the space must be well-lit. The cliff sensors may fail to detect items if the room is dark. Allowing your vacuum to fall apart. What you need to do is make sure that your whole home is well-lit. That way, your Roomba will be able to clean your house thoroughly. And you’ll be able to see cliffs straight immediately.
If you’re using your Roomba at night, this is very critical. Do you have any smart lighting in your house? Then connect your bright lights to your Roomba cleaner and see what happens. You may be able to program your lights to turn on when your Roomba is cleaning. Also, after your Roomba has finished cleaning, be sure you automate your lights to turn off. You wouldn’t have to be concerned about keeping your lights on when you’re sleeping or gone.
4. Install Virtual Walls
You may create a visual wall if you don’t have smart lighting and don’t want to keep your light on at night. A virtual wall is an infrared-light-based barrier that separates your Roomba from the rest of the house.
This device was created by iRobot to complement the Roomba vacuum cleaners. It speeds up the cleaning process by keeping the Roomba out of “risk zones.” Avoiding the occurrence of Roomba Error 6. Install Virtual Walls if you have multiple “risk zones” in your house.
There are two options for a virtual wall: “Auto” and “Manual.” When you turn on Auto Virtual Wall, it will stay on for up to six months. You won’t have to open it whenever you want to utilize it, for example. Manual Virtual Mode, on the other hand, necessitates manually opening it. It may be inconvenient for some, but consider how much battery charge you may save.
The trick is to choose the option that best matches your needs. In terms of location, a Virtual Wall may be placed almost anywhere. For best effectiveness, put many Virtual Walls throughout your property. Install a Virtual Wall in the following regions for the most outstanding results:
- Stairs Edges
- Close to sensitive furnishings.
- The entrance to a balcony or patio.
5. Replace Dark-Colored Carpets Or Rugs
Are you still having issues with the Roomba Error 6 not working? When your vacuum is on or near a dark-colored carpet, does Roomba Error 6 occur? If that’s the case, that’s what’s causing the problem. Remember how Error 6 is triggered by dark surfaces?
Dark-colored carpets or rugs may be mistaken for dark surfaces by a Roomba cleaner. Replace the dark-colored carpets in your house with light-colored carpets to alleviate this problem. But if it isn’t an option for you, I have a brilliant suggestion!
Yes, Roomba vacuums are unable to clean dark-colored carpets. Leaving your carpets in a state of disarray. There is, however, a technique to clean such carpets using a Roomba. Cover the cliff sensors with a piece of paper or fabric. Your Roomba will no longer avoid your dark-colored carpets.
Maintaining a clean and attractive environment in all areas of your house. This might also result in Roomba Error 6. If this occurs, just press “CLEAN” to continue cleaning. And only do that if it’s essential. Some carpets aren’t meant to be vacuumed with a Roomba. Make sure your carpet isn’t damaged before you use this cleaning procedure.
How To Clean Your Roomba’s Cliff Sensors
- If moving your Roomba to a different surface hasn’t resolved the “error 6, relocate Roomba to a new spot” warning, it’s time to clean the cliff sensors on your vacuum. An old bath towel, some paper towels, cotton swabs, and a bottle of window cleaner are all good to have on hand.
- To begin, turn your Roomba off and place it upside down on the floor in front of you on a towel. In the first shot, look for the cliff sensors near the arrows. Wipe any dust away from the edge of the vacuum and the sensors with a paper towel dampened with window cleaner or clean water.
- Clean the face of each sensor using a cotton swab lightly saturated with window cleaner, beginning in the center and going outwards in a circular motion.
- Repeat step 3 with a dry cotton swab to remove any residual liquid.
- Check for dirt and hair accumulation in other regions of the Roomba and clean them. Check below the “edge brush” for any hair or thread that may have been twisted around it. Remove trash from the rollers’ ends and the Roomba’s front wheel.
- Turn the Roomba over and hit the “start” button in a cleaning area. Cleaning the cliff sensors should have resolved your issue if you no longer obtain an “error 6” code.
How Do I Reset My Roomba E6 Battery?
If you find that your Roomba’s cleaning cycles are becoming less effective, your battery is probably nearing the end of its life. For this, the Roomba also features a battery regeneration method that works with our compatible batteries. On other websites, this technique is referred to as a battery reset. If we repeat this easy technique regularly, the battery will recover, and the battery’s usable life will be significantly extended.
- To start your Roomba, hit the “Clean” button.
- Keep the buttons “Spot” and “Dock,” which are above and below the button “Clean,” pushed for 10 seconds.
- When you release both buttons simultaneously, you’ll hear the Roomba’s signature start-up sound.
- Set the Roomba to load for at least 12 hours or until the “Clean” button becomes green.
Conclusion Roomba Error 6 Not Working
Roomba is one of the most convenient ways of cleaning the house with less effort. But like all other electrical devices, this will also need regular maintenance. Regularly check for the side wheels, bumper, gears, bearing, sensors, and brushes. This will keep your Roomba from any trouble.